Hi miez3858 Welcome to the community. Is the latest official ROW/International (Android 4.4) S650 firmware. Installation instructions: First you will need to install the phone drivers:You can find the Lenovo autorun driver in 'CD Drive: Lenovo Suite' -> when you connect the phone to your PC.or install driver.Unzip->Run->When Windows warns about the drivers click 'Accept / Install anyway'->Reboot PC. Then you will need to install the vcom/sp driver:In the Flashtool folder you have a 'SP_Drivers_v1.5' -->Follow the SP driver installation instructions from Message. Open the flashtool/Click on Flash_tool.exe->press on 'Scatter-loading' and select the MT6582_Android_scatter.txt (you can find it in the unpacked firmware folder)->wait for it to load->Go to 'Options'->'Option.'

Explore world leading Sat Nav systems and GPS devices from Mio. Order top-of-the-range SatNavs online today and have them delivered to your door. Buy new regions or update your maps Buying new maps from Mio will ensure that you always have the best possible route to where you want to go. The Unified Extensible Firmware Interface (UEFI) had support for Legacy mode. Il Mio Account. PCIe adapter with PCI firmware spec 3.x does not need as much Option ROM space due to design changes. USB 3.0 Basic Dock, ThinkVision L1940p 19-inch Wide Monitor, S650 Smartphone, Blade - HS23 (BladeCenter).

'->'Download' and mark 'DA DL All With Checksum' and close the Options tab->In this case I suggest to select 'Firmware Upgrade'instead of 'Download Only'(DO NOT SELECT 'Format All + Download)->Press on 'Download' (green arrow/upper left side) ->Shutdown the phone (and make sure it's completely shut down)and remove the battery(yes,remove the battery) -> connect your phone to the computer via USB data cable-> If all the drivers are OK the installation/flashing process will begin(wait a little. It will start to show red,yellow, grey etc colors)->Wait for it to finish(might take some time/please be patient and DO NOT MOVE the cable).That's it. Advice:If the vcom/sp driver is installed properly and the installation process dosen't start in(let's say)30-40 sec.disconnect and reconnect the usb cable.

Video might help. PS.On Windows 8/8.1 you need to disable Driver Signature Verification first-> You will lose all your data.Please do a backup first. Don't need to say that you're doing this at OWN RISK.

Hope this helps, Regards.

Moov Spirit V735 update This patch updates your device to the latest version. You will no longer experience freezing issues when connecting your device to the PC and you will also be able to watch a video whilst driving. Before you install the update Check if your device does not yet have the latest version installed. To check this, reset your device by sliding the button at the top of your device to reset and then to on. The first screen that appears (and is only visible for a few seconds) shows you the version that is installed on your device.

If you see Moov735.R20 then you do not need to install this update, if you see any number lower then 20, you can install this update (e.g. How to install the update • Download the update to a folder on your computer. • Unzip the file HammerV700_EU_R00_Patch.zip • Connect your device to the computer using the supplied USB cable. • Turn on your device and wait until your device is recognized as a mass storage device.